Examples; Pairresync - HP StorageWorks P9000 Reference Manual

Table 9 Specific error codes for pairsplit
Category
Volume status
Unrecoverable

Examples

Figure 8 Example of -FHORC option for pairsplit
Figure 9 Example of -FMRCF option for pairsplit

pairresync

The pairresync command re-establishes a split pair volume and then restarts the update copy
operations to the secondary volume. The pairresync command can resynchronize either a paired
logical volume or a group of paired volumes. The normal direction of resynchronization is from
the primary volume to the secondary volume. If the --restore option is specified (Business Copy
only), the pair is resynchronized in the reverse direction (For example, secondary volume to primary
volume). The primary volume remains accessible during pairresync, except when the -restore option
is specified. The secondary volume becomes write-disabled when the pairresync command is
issued. The primary volume's server is automatically detected by the pairresync command, so the
server does not need to be specified in the pairresync command parameters.
32 Replication commands
Error code Error message
EX_ENQVOL Unmatched volume
status within the group
EX_INCSTG Inconsistent status in
group
EX_INVVOL Invalid volume status
EX_EVOLCE Pair Volume
combination error
EX_INVSTP Invalid pair status
EX_EWSUSE Pair suspended at
WAIT state
Recommended action
Confirm status using the pairdisplay
command. Make sure all volumes in the group
have the same fence level and volume
attributes.
Confirm pair status using pairdisplay.
Confirm volume status/attribute using
pairdisplay l or 'raidvchkdsp v aou'.
Confirm pair status using pairdisplay, and
change combination of volumes.
Confirm pair status using pairdisplay.
Issue pairresync manually to the identified
failed paired volume to try to recover it. If the
trouble persists, call HP Technical Support.
Value
236
229
222
235
228
234