HP StorageWorks P9000 Reference Manual page 156

# raidcom get ldev -ldev_id 577
Serial# : 63502
LDEV : 577
SL : 0
CL : 0
VOL_TYPE : OPEN-V-CVS
VOL_Capacity(BLK) : 2181120
VOL_Capacity(cyl
) : 22720 (Displayed only when the attribute is MF-VOL)
NUM_LDEV : 1
LDEVs : 577
NUM_PORT : 2
PORTs : CL2-E-0 1 Linux_X86 : CL2-E-1 1 Solaris
F_POOLID : NONE
VOL_ATTR : CVS
RAID_LEVEL : RAID1
RAID_TYPE : 2D+2D
NUM_GROUP : 1
RAID_GROUPs : 02-01
DRIVE_TYPE : DKS2C-K072FC
DRIVE_Capa : 141822798
LDEV_NAMING : Oracle_data_1
STS : NML
OPE_TYPE : QFMT
OPE_RATE : 100
MP# : 2
Description on each column in output example
-Serial#
Product serial number.
LDEV
It shows an LDEV number.
SL
It shows the information of SLPR (It is fixed as 0 on the devices other than XP24000/XP20000
Disk Array).
CL
It shows the information of CLPR.
VOL_TYPE
It shows an emulation type of the relevant LDEV.
This displays the same name as the product ID of the Inquiry command.
If the LDEV is not installed or in the state of creating or deleting an LDEV, the following items are
displayed depend on the status.
NOT DEFINED: An LDEV is not installed.
DINING: An LDEV is being created.
REMOVING: An LDEV is being deleted.
VOL_Capacity (BLK)
It shows the capacity of LDEV in block size.
VOL_Capacity (cyl)
It shows the capacity of LDEV in cylinder size and is displayed only when the attribute is MF-VOL.
NUM_LDEV
It shows the number of LDEVs that configures the LU where the specified LDEV is belongs to.
LDEVs
156 Configuration setting commands