Syntax; Options And Parameters; Examples - HP StorageWorks P9000 Reference Manual

Syntax

raidcom add journal -journal_id
<journal ID#> {-ldev_id <ldev#>
<device group name> [<device name>]} [-mp_blade_id <mp#> | -timer_type <timer type> ]

Options and parameters

Option
-journal_id <journal
ID#>
-ldev_id <ldev#> ...
[ -cnt <count> ]
-grp_opt <group
option>
-device_grp_name
<device group name>
[<device name>]
[ -mp_blade_id
<mp#> ]
[ -timer_type <timer
type> ]

Examples

For Open:
Creating a journal #1 of LDEVs: 265, 266, 267, and 278.
# raidcom add journal –journal_id 1 -ldev_id 265 266 267 268
Creating a journal #1 with an LDEV belonging to the device Group:grp1.
# raidcom add journal -journal_id 1 -grp_opt ldev -device_grp_name grp1
For M/F:
Creating a journal #1 with LDEVs: 265, 266, 267, and 278. As a timer type, the system clock of
the mainframe host is used. (When LDEV is added to the journal of M/F, it is required to specify
the system clock of the mainframe host to the timer type.)
# raidcom add journal –journal_id 1 -ldev_id 265 266 267 268 -timer_type system
146 Configuration setting commands
[-cnt <count>] | -grp_opt <group option> -device_grp_name
Description
Specifies a journal number (0-255).
Specifies an LDEV number (0-65279).
Up to 64 LDEVs can be specified at a time.
For example:
-ldev_id 200
-ldev_id 100- 1 10
-ldev_id 100 -cnt 10
Specifies a count (2-64).
The count becomes singular if the specification is omitted.
In this command, effective value is up to 64.
Specifies the device information extracted from the LDEV belonging to the device group. Specify
"ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max. 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Specifies an MP Blade ID number (0-7).
If the specification is omitted, the device automatically allocates an MP Blade ID number.
For example:
-mp_blade_id 2
Specifies a timer type among system, local or None. For details, see the Cnt Ac-J manual for
the Timer Type option.
For example:
-timer_type system
-timer_type local