Acl Binding - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

ACL Binding

When an ACL is bound to an interface, all the rules that have been defined
for the ACL are applied to that interface. Whenever an ACL is assigned on a
port or LAG, flows from that ingress or egress interface that do not match the
ACL, are matched to the default rule, which is to Drop unmatched packets.
To change the default action for unmatched packets to an action other than
Drop, do the following:
• Add an additional ACE to the ACL with "Any" in all fields
• Set its action other than Drop
• Set the priority to the lowest in the ACL.
To bind ACLs to interfaces:
1 Click Switching > Network Security > ACL Binding to display the ACL
Binding: Summary page.
Figure 8-8. ACL Binding: Summary
The ports on the selected unit are displayed along with their associated
ACLs.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxU_Switching_NetworkSecurity.fm
Dell PowerConnect 55xx Systems User Guide
123