Configuration Work Flow - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

Configuration Work Flow

To configure the switches:
1 For each switch in the stack:
Connect it to a terminal, as described in the "Connecting the Switch
a
to the Terminal" on page 59.
Boot the switch, as described in the "Booting the Switch" on page 60.
b
Assign a unit ID to the switch, as described in "Assigning Unit IDs" on
c
page 50.
2 Connect the units in the stack to each other, as described in "Configuring
the Stack" on page 61.
3 Connect the Master unit to the terminal, reboot the unit and the Setup
Wizard is run automatically, as described in "Configuration Using the
Setup Wizard" on page 61.
4 Respond to the Setup Wizard prompts.
5 Continue managing the switch, either through the console or Telnet, using
the CLI or the web GUI.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
58
Dell PowerConnect 55xx Systems User Guide
Contax\CxUG_InitialConfiguration_gsg.fm