Dell PowerConnect 5548P System User's Manual page 690

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
– Exceed Action — Select the action to be performed on incoming
packets that exceed the CIR. The possible options are:
• None — No action is performed on packets exceeding the defined
CIR value.
Drop — Packets exceeding the defined CIR value are dropped.
•
• Remark DSCP — The DSCP values of packets exceeding the
defined CIR value are rewritten to a value entered in the DSCP
Mapping pages.
Defining Aggregate Policers Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Aggregate Policer pages.
Table 22-14. Aggregate Policer CLI Commands
CLI Command
qos aggregate-policer
aggregate-policer-name
committed-rate-kbps excess-
burst-byte[exceed-action
{drop|policed-dscp-transmit}]
no qos aggregate-policer
aggregate-policer-name
The following is an example of the CLI commands:
console(config)# qos aggregate-policer policer1 124000
9600 exceed-action drop
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGQoS.fm
Description
Defines the policer parameters that can
be applied to multiple traffic classes
within the same policy map.
Use the no form of this command to
remove an existing aggregate policer.
Dell PowerConnect 55xx Systems User Guide
689