Dell PowerConnect 5548P System User's Manual page 661

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Scheduling WRR Weight — If WRR is selected, enter the WRR
–
weight assigned to the queue.
– % of WRR Bandwidth — Displays the amount of bandwidth assigned
to the queue. These values represent the percent of the WRR weight.
Configuring Queue Settings Using CLI Commands
The following table summarizes the CLI commands for configuring fields in
the Queue page.
Table 22-3. Queue Setting CLI Commands
CLI Command
priority-queue out num-of-
queues number-of-queues
no priority-queue out num-
of-queues
wrr-queue bandwidth weight1
weight2 ... weight_n
no wrr-queue bandwidth
The following is an example of the CLI commands:
console(config)# priority-queue out num-of-queues 2
console(config-if)# wrr-queue bandwidth 6 6 6 6 6 6
Mapping to Queue
This section provides information for mapping DSCP and CoS values to
service queues, and contains the following topics:
• CoS to Queue
• DSCP to Queue
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
660
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGQoS.fm
Description
Configures the number of expedite
queues.
Use the no form of this command to
restore the default configuration.
Assigns WRR weights to egress queues.
Use the no form of this command to
restore the default configuration.