Dell PowerConnect 5548P System User's Manual page 199

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Log Copy Files Events — Enable/disable generating logs when files
–
are copied.
– Log Management Access Events — Enable/disable generating logs
when the device is accessed using a management method, for
example, each time the device is accessed using SSH, a device log is
generated.
4 To select the destination of logging messages, according to their severity
levels, check the minimum severity level that will be associated with the
console log, RAM log, Log file (Flash memory) and remote SYSLOG
servers. When a severity level is selected, all severity levels above the
selection are selected automatically.
Enabling Logs Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Global Parameters page.
Table 9-13. Global Log Parameters CLI Commands
CLI Command
logging on
no logging
logging console level
no logging console level
logging file level
no logging file
file-system logging
{copy|delete-rename}
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
198
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSystemConfig.fm
Description
Enables error message logging.
Turns off error message logging.
Limits messages logged to the
console, based on severity.
Use the no form of this command to
disable logging limiting to the
console.
Limits SYSLOG messages stored in
flash memory, based on severity.
Use the no form of this command to
cancel using the buffer.
Enables the logging of file system
events.