Dell PowerConnect 5548P System User's Manual page 65

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
other accounts and change privilege levels later.
For more information on setting up user accounts
and changing privilege levels, see the user
documentation.
To set up a user account:
Enter the user name:
Please enter the user password:
Please reenter the user password:
8 Enter the following:
• User name, for example "admin"
• Password and password confirmation.
9 Press Enter.
The following information is displayed:
Next, an IP address is setup. The IP address is
defined on the default VLAN (VLAN 1). This is the
IP address you use to access the Telnet, Web
interface, or SNMP interface for the switch.
To set up an IP address:
Please enter the IP address of the device
(A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or nn):
10 Enter the management IP address and IP subnet mask, for example
192.168.2.100 as the IP address and 255.255.255.0 as the IP subnet mask.
11 Press Enter.
The following information is displayed:
Finally, set up the default gateway.
Please enter the IP address of the gateway from
which this network is reachable
(e.g. 192.168.2.1).Default gateway
(A.B.C.D):[0.0.0.0]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
64
Dell PowerConnect 55xx Systems User Guide
Contax\CxUG_InitialConfiguration_gsg.fm