Dell PowerConnect 5548P System User's Manual page 634

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
– Drop Events — Number of dropped packets due to lack of network
resources during the sampling interval. This may not represent the
exact number of dropped packets, but rather the number of times
dropped packets were detected.
– Received Bytes (Octets) — Number of data octets, including bad
packets, received on the network.
– Received Packets — Number of packets received during the sampling
interval.
– Broadcast Packets — Number of good Broadcast packets received
during the sampling interval.
– Multicast Packets — Number of good Multicast packets received
during the sampling interval.
– CRC Align Errors — Number of packets received during the sampling
session, with a length of between 64-1632 octets, who had a bad
Check Sequence (FCS) with an integral number of octets, or a bad
FCS with a non-integral number.
Undersize Packets — Number of packets, having less than 64 octets,
–
received during the sampling session.
– Oversize Packets — Number of packets having more than 1632 octets,
received during the sampling session.
– Fragments — Number of packets, having less than 64 octets and
having a FCS, received during the sampling session.
– Jabbers — Number of packets, having more than 1632 octets and who
had an FCS, received during the sampling session.
– Collisions — Estimated number of packet collision that occurred
during the sampling session. Collisions are detected when repeater
port detects two or more stations transmitting simultaneously.
– Utilization — Estimated main physical layer network usage on an
interface during the session sampling. The value is stated in
hundredths of a percent.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGStatistics.fm
Dell PowerConnect 55xx Systems User Guide
633