Dell PowerConnect 5548P System User's Manual page 305

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Table 9-53. Network Pool CLI Commands (Continued)
CLI Command
address {network-number|low
low-address high high-
address} {mask|prefix-
length}
no address
lease {days [{hours}
[minutes]]|infinite}
no lease
default-router ip-address
[ip-address2 ... ip-
address8]
no default-router
dns-server ip-address [ip-
address2 ... ip-address8]
no dns-server
domain-name domain
no domain-name
netbios-name-server ip-
address [ip-address2 ... ip-
address8]
no netbios-name-server
netbios-node-type {b-node|p-
node|m-node|h-node}
no netbios-node-type
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
304
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSystemConfig.fm
Description
Configures the subnet number, mask and
start and end addresses for a DHCP address
pool on a DHCP Server.
Use the no form of this command to remove
the subnet number and mask.
Configures the time duration of the lease for
an IP address that is assigned from a DHCP
server to a DHCP client.
Use the no form of this command to restore
the default value
Configures the default router list for a
DHCP client.
Use the no form of this command to remove
the default router list.
Configures the DNS IP servers available to a
DHCP client.
Use the no form of this command to remove
the DNS server list.
Specifies the domain name for a DHCP
client.
Use the no form of this command to remove
the domain name.
Configures the NetBIOS Windows Internet
Naming Service (WINS) servers that are
available to Microsoft DHCP clients.
Use the no form of this command to remove
the NetBIOS name server list.
Configures the NetBIOS node type for
Microsoft Dynamic Host Configuration
Protocol (DHCP) clients.
Use the no form of this command to remove
the NetBIOS node type.