FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Configuring IPv6-based ACLs Using CLI Commands
The following table summarizes the CLI commands for configuring
I Pv6-based ACLs .
Table 8-6. IP-Based ACL CLI Commands
CLI Command
ipv6 access-list [access-list-
name]
no ipv6 access-list [access-
list-name]
The following is an example of some of the CLI commands:
console(config)# ipv6 access-list server-acl
IPv6-Based ACEs
To add a rule to an IPv6-based ACL:
1 Click Switching > Network Security > IPv6 Based ACE to display the
IPv6 ACE: Summary page.
Figure 8-7. IPv6 Based ACE: Summary
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
118
Dell PowerConnect 55xx Systems User Guide
Contax\CxU_Switching_NetworkSecurity.fm
Description
Defines an IPv6 access list and places
the device in IPv6 access list
configuration mode
Use the no form of this command to
remove the access list.