Dell PowerConnect 5548P System User's Manual page 152

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
• Shutdown — Discard the packet from any unlearned source and
shut down the port. Ports remain shutdown until they are
activated, or the switch is reset.
Host Authentication pages:
Table 8-16. Host Authentication CLI Commands
CLI Command
dot1x host-mode {multi-
host|single-host|multi-
sessions}
dot1x traps mac-
authentication failure
no dot1x traps mac-
authentication failure
dot1x traps mac-
authentication success
no dot1x traps mac-
authentication success
dot1x violation-mode
{restrict | protect |
shutdown}
no dot1x violation-mode
show dot1x advanced
[gigabitethernet|tengigabite
thernet] port-number]
The following is an example of the CLI commands:
console(config)# interface gi1/0/1
console(config-if)# dot1x host-mode multi-host
console(config-if)# dot1x host-mode single-host
console(config-if)# dot1x host-mode multi-sessions
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxU_Switching_NetworkSecurity.fm
Dell PowerConnect 55xx Systems User Guide
Description
Allows a single host (client) or multiple
hosts on an IEEE 802.1x-authorized port.
Enables sending traps when a MAC
address is successfully authenticated by
the 802.1X mac-authentication access
control.
Use the no form of this command to
disable the traps.
Enables sending traps when MAC address
was failed in authentication of the 802.1X
MAC authentication access control.
Use the no form of this command to
disable the traps.
Configures the action to be taken, when a
station whose MAC address is not the
supplicant MAC address, attempts to
access the interface.
Use the no form of this command to
return to default.
Displays 802.1x advanced features for the
device or specified interface.
151