Dell PowerConnect 5548P System User's Manual page 485

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Frame Type — Packet type accepted by the LAG. The possible options
–
are:
• Admit All — Tagged and untagged packets are both accepted by
the LAG.
• Admit Tag Only — Only tagged packets are accepted by the LAG.
• Admit Untagged Only — Only untagged packets are accepted on
the LAG.
– Ingress Filtering — Enable/disable Ingress filtering by the LAG.
Ingress filtering discards packets that are destined to VLANs of which
the specific LAG is not a member.
– Native VLAN ID (1-4094) — Enter VLAN used for untagged traffic
to trunk ports, or select None.
– Multicast VLAN ID (1-4094) — Enter VLAN used for Multicast TV
VLAN traffic on access ports, or select None.
– Customer VLAN ID (1-4094) — Enter VLAN used for customer
ports, or select None.
Assigning LAGs to VLAN Groups Using CLI Commands
Refer to Table 14-2 for a list of the LAG to VLAN CLI commands.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
484
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSwitching_VLAN.fm