Dell PowerConnect 5548P System User's Manual page 330

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
– Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
• VLAN — The VLAN on which the IPv6 interface is configured.
• ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
SNMP Management Station — Enter the management station IP
–
address for which the SNMP community is defined, or choose All to
be able to receive SNMP messages from anywhere.
– Community String (1-20 Characters) — Enter the community string,
which functions as a password, and is used to authenticate the
management station to the device.
4 To associate access mode and views directly with the community, enter the
fields:
– Basic — Check to enable SNMP Basic mode for a selected
community.
Access Mode — If Basic is selected, specify the access rights of the
–
community. The possible options are:
• Read-Only — Management access is restricted to read-only, and
changes cannot be made to the community.
Read-Write — Management access is read-write and changes can
•
be made to the device configuration, but not to the community.
• SNMP Admin — User has access to all device configuration
options, as well as permissions to modify the community.
– View Name — Select a view from a list of user-defined SNMP views.
The view determines other characteristics associated with the
community.
5 To use Advanced mode, enter the fields:
– Advanced — When SNMP Advanced mode is selected, you can select
an SNMP group to specify the SNMP access control rules for the
selected community. The SNMP Advanced mode is defined only with
SNMPv3.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSystemConfig.fm
Dell PowerConnect 55xx Systems User Guide
329