Dell PowerConnect 5548P System User's Manual page 461

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Add —Add these VLANS to the MST instance.
•
• Remove —Remove these VLANS from the MST instance.
Mapping VLAN to MSTP Instances Using CLI Commands
The following table summarizes the CLI commands for mapping VLANs to
MSTP instances.
Table 13-5. Mapping VLAN to MSTP Instances Using CLI Commands
CLI Command
spanning-tree mst
configuration
instance instance-id vlan
vlan-range
no instance instance-id
vlan vlan-range
show spanning-tree detail
The following is an example of the CLI commands:
console(config)# spanning-tree mst configuration
console(config-mst)# instance 1 vlan 10-20
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
460
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSwitching_STP.fm
Description
Enters MST Configuration mode.
Maps VLANs to an MST instance.
Use the no form of this command to restore
default mapping.
Displays the spanning-tree configuration