FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Defining iSCSI Targets Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the iSCSI Targets Table.
Table 20-2. iSCSI Targets Table CLI Commands
CLI Command
iscsi target port tcp-port-1
[tcp-port-2... tcp-port-8]
[address ip-address] [name
target-name]
no iscsi target port tcp-
port-1 [tcp-port-2... tcp-port-
8] [address ip-address]
show iscsi sessions
The following is an example of the CLI commands:
console(config)# iscsi target port 30001 address
176.16.1.1 name iqn.1993-11.com.disk
vendor:diskarrays.sn.45678.tape:sys1.xyz
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSwitching_iscsi.fm
Description
Configures iSCSI port/s, target address
and name.
Use the no form of this command to
delete an iSCSI target.
Show the current iSCSI targets and
sessions.
Dell PowerConnect 55xx Systems User Guide
603