Boot Image Download - Dell PowerConnect 5548P System User's Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
5 Select the image for the next boot by entering the boot system command.
After this command, enter the show bootvar command to verify that the
copy indicated as a parameter in the boot system command is selected for
the next boot.
The following is an example of the information that appears:
console# boot system image-2
console# show bootvar
Images currently available on the Flash
Image-1 active
Image-2 not active (selected for next boot)
If the image for the next boot is not selected by entering the boot system
command, the system boots from the currently active image.
6 Enter the reload command. The following message is displayed:
console# reload
This command will reset the whole system and
disconnect your current session. Do you want to
continue (y/n) [n]?
7 Enter Y. The device reboots.

Boot Image Download

Loading a new boot image from the TFTP server or USB port, updates the
boot image. The boot image is loaded when the device is powered on. A user
has no control over the boot image copies.
To download a boot image through the TFTP server:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGAdvanced Configuration.fm
Dell PowerConnect 55xx Systems User Guide
85