FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Configuring IP-based ACLs Using CLI Commands
The following table summarizes the CLI commands for configuring I P-based
.
ACLs
Table 8-4. IP-Based ACL CLI Commands
CLI Command
ip access-list extended acl-
name
no ip access-list extended acl-
name
The following is an example of some of the CLI commands:
console(config)# ip access-list extended server-acl
IPv4-Based ACEs
To add a rule to an ACL:
1 Click Switching > Network Security > IPv4 Based ACE to display the
IPv4 Based ACE page.
Figure 8-5. IPv4 Based ACE: Summary
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
110
Dell PowerConnect 55xx Systems User Guide
Contax\CxU_Switching_NetworkSecurity.fm
Description
Defines an IPv4 access list and places
the device in IPv4 access list
configuration mode
Use the no form of this command to
remove the access list.