Dell PowerConnect 5548P System User's Manual page 394

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
• Current Power Consumption — Displays the current power
consumption.
• Power Savings — Displays the percentage of power saved by running
in Green Ethernet mode.
4 Select a unit in the stack to display its power consumption parameters. Its
ports are displayed along with the following settings.
– Energy Efficient Ethernet
• Oper — Enabled or not on the port
• Remote Peer —Enabled or not on the remote peer
– Short-Reach
• Oper — Enabled or not on the port
• Fault Reason —Reason that short reach is not enabled
Cable Length (Meter) — Length of cable.
–
5 Click LLDP Interface Details.
6 Select a unit in the stack. The following is displayed for each port on the
unit:
– Port — Port number.
– Oper — Displays the operational status of Green Ethernet.
– Resolved Tx Timer (μsec) — Integer that indicates the current
Tw_sys_tx is supported by the local system.
– Local Tx Timer (μsec) — Indicates the time (in micro seconds) that
the transmitting link partner waits before it starts transmitting data
after leaving Low Power Idle (LPI mode).
– Resolved Rx Timer (μsec) — Integer that indicates the current
Tw_sys_tx supported by the remote system.
– Local Rx Timer (μsec) — Indicates the time (in micro seconds) that
the receiving link partner requests that the transmitting link partner
waits before transmission of data following Low Power Idle (LPI
mode).
– Remote Tx Timer (μsec) — Indicates the local link partner's
reflection of the remote link partner's Tx value.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
Contax\CxUGSwitching_Ports.fm
Dell PowerConnect 55xx Systems User Guide
393