FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Setting Dynamic ARP Inspection Global Settings Using CLI Commands
The following table summarizes the CLI commands for configuring the fields
in the Global Settings pages .
Table 18-1.
ARP Inspection Global Settings CLI Commands
CLI Command
ip arp inspection
no ip arp inspection
ip arp inspection validate
no ip arp inspection
validate
ip arp inspection logging
interval {seconds |
infinite}
no ip arp inspection logging
interval
The following is an example of some of the CLI commands:
console(config)# ip arp inspection
console(config)# ip arp inspection validate
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
564
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSwitching_ARP.fm
Description
Enables ARP inspection.
Use the no form of this command to
disable ARP inspection.
Performs specific checks for dynamic ARP
inspection.
Use the no form of this command to
restore the default configuration.
Sets the minimum time interval between
successive ARP SYSLOG messages.
Use the no form of this command to
restore the default configuration.