Dell PowerConnect 5548P System User's Manual page 251

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
The entries in the table are displayed.
2 Enter the parameters:
• ARP Entry Age Out (1 - 40000000) — Enter the amount of time in
seconds that can pass between ARP requests for this address. After
this period, the entry is deleted from the table.
• Clear ARP Table Entries — Select the type of ARP entries that are
cleared on all devices. The possible options are:
• None — ARP entries are not cleared.
• All — All ARP entries are cleared.
• Dynamic — Only learned ARP entries are cleared.
• Static — Only static ARP entries are cleared.
3 To add a mapping, click Add, and enter the fields:
– Interface — Select an interface to be associated with the addresses.
– IP Address — Enter the station IP address, which is associated with
the MAC address filled in below.
– MAC Address — Enter the station MAC address, which is associated
in the ARP table with the IP address.
4 To change the status of a mapping from static to dynamic or vice versa,
click Edit and enter the field:
– Status — Select the entry's status. The possible options are:
• Static — The entry was statically entered.
• Dynamic — The entry was dynamically learned.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 1 / 1 2 - F O R P R O O F O N LY
250
Dell PowerConnect 55xx Systems User Guide
Contax\CxUGSystemConfig.fm