Digi WAN 3G User Manual page 98

Set mobile configuration settings to factory defaults
The Set to Defaults button on the Mobile Configuration page sets all the mobile settings to factory
defaults and sets the Service Provider selection back to deselected.
Mobile service provider settings
The Mobile Service Provider settings part of the screen identifies the service provider to use in
connecting to the mobile network. The information displayed varies by Digi Cellular Family
product and whether the remote service provider is GSM- or CDMA-based. Settings that may be
displayed on this screen include:
Service Provider: For GSM-based mobile service providers, this is the service provider

to use in connecting to the mobile network. The service provider must match the
provider that supplied the SIM card.This must match the provider that supplied the SIM
card. (Not displayed for CDMA products.)
Service Plan: For GSM-based mobile service providers, this is the service plan to use in

connecting to the mobile network. This setting must match the plan that the service
provider has supplied to you. This is also sometimes known as the APN (Access Point
Name).
Username and Password: For GSM-based mobile service providers, these settings are

the username and password of the mobile connection needed to access the mobile
network.
Device provisioning state: For CDMA-based mobile service providers, the text below

the Service Provider selection list states whether the device has already been
provisioned. Clicking the Provision Device button launches a wizard for provisioning
the device. Mobile device provisioning is described next.
C o n f i g u r e D i g i d e v i c e s
9 8