Digi WAN 3G User Manual page 55

Ethernet IP settings
The Ethernet IP Settings page configure how the IP address of the Digi device is obtained, either
by DHCP or by using a static IP address, subnet mask, and default gateway. For more information
about how these settings are assigned and used in your organization, contact your network
administrator.
Obtain an IP address automatically using DHCP: When the Digi device is rebooted,

it will obtain new network settings.Use the Digi Device Setup Wizard to find the Digi
device, since it will likely have a new address.
 Use the following IP Address: Choose this option to supply static settings. An IP
address and Subnet mask must be entered. Other items are not mandatory, but may be
needed for some functions (such as talking to other networks).
IP Address: An IP address is like a telephone number for a computer. Other network

devices talk to this Digi device using this ID.
The IP address is a 4-part ID assigned to network devices. IP addresses are in the form
of 192.168.2.2, where each number is between 0 and 255.
Subnet Mask: The Subnet Mask is combined with the IP address to determine which

network this Digi device is part of. A common subnet mask is 255.255.255.0.
 Default Gateway: IP address of the computer that enables this Digi device to access
other networks, such as the Internet.
Enable Auto assignment: With AutoIP enabled, the Digi device will automatically

self-configure an IP address when an address is not available from other methods, for
example, when the Digi device is configured for DHCP and a DHCP server is not
currently available.
WiFi IP settings
The WiFi IP settings configure how the IP address of a Wi-Fi-enabled Digi device is obtained. It
has the same settings as the Ethernet IP settings page.
C o n f i g u r e D i g i d e v i c e s
5 5