Digi WAN 3G User Manual page 165

Current Network Gateway Status (Non-Failover)
This information reports the status of the non-failover management of the default gateway.
If Network Failover is enabled (On) and can successfully configure a default gateway,
failover always overrides the non-failover Gateway Priority configuration.
Interface Table
The current status of all available IP network interfaces. The table is displayed in order of the
interface priority configured in the Advanced Network Settings. For each network interface,
the following information is displayed:
Priority: The priority of the interface configured in the Advanced Network
Settings. The highest priority is 1, which is the first interface in the configured
Advanced Network Settings Interface Priority list.
Interface: The name of the network interface.
Status: The current status of this network interface. Possible status values and their
meanings:
1 - Up: The interface is Up and configured in the system. This interface is suitable
for use as the default gateway.
0 - Down: The interface is Down or not configured in the system. This interface is
not suitable for use as the default gateway.
The interface list is maintained in the Interface Priority order configured by the user in the
Advanced Network Settings. When any interface changes status, the interface list is
examined for the interface that has the highest status priority, nearest the start of the list. The
highest priority interface with an Up status is used as the default gateway.
Gateway
The gateway IP address associated with the interface, or 0.0.0.0 if the interface does not have
an associated gateway. An interface with no gateway is not suitable for use as the default
gateway.
M o n i t o r a n d m a n a g e D i g i d e v i c e s
1 6 5