Digi WAN 3G User Manual page 122

Alarm conditions
The Alarm Conditions part of the Alarms page shows a list of all of the alarms. Up to 32 alarms
can be configured for a Digi device, and they can be enabled and disabled individually.
Alarm list and status
The alarm list displays the current status of each alarm. This list can be used to list to view alarm
status at a glance, then view more details for each alarm as needed.
 Enable: Checkbox indicates whether the alarm is currently enabled or disabled.
 Alarm: The number of the alarm.
 Status: The current status of the alarm, which is either enabled or disabled.
Type: The basis for the alarm.

Trigger: The conditions that trigger the alarm.

SNMP Trap: Indicates whether the alarm is sent as an SNMP trap.

– If the SNMP Trap field is disabled, and the Send To field has a value, the alarm is sent
as an email message only.
– If the SNMP Trap field is enabled and the Send To field is blank, the alarm is sent as an
SNMP trap only.
– If the SNMP Trap field is enabled, and a value is specified in the Send To field, that
means the alarm is sent both as an email and as an SNMP trap.
Send To: The email address to which the alarm is sent.

Email Subject: Text to include in the Subject line of alarms sent as email messages.

C o n f i g u r e D i g i d e v i c e s
1 2 2