Digi WAN 3G User Manual page 160

WiFi LAN statistics
The WiFi LAN Statistics section displays more detailed wireless statistics that may aid in
troubleshooting network communication problems in wireless Digi devices.
Status
The current status of the wireless Digi device, which may include:
Not Connected: not associated or connected w/ any access point, perhaps because
the wireless device has not fully initialized, is out of range, or the wireless interface
is disconnected because the Ethernet interface is enabled.
Searching for Network: searching for a wireless network or access point for
connection.
Associated with Network: successfully associated with the network w/ the proper
network settings and encryption.
Authenticated with Network: successfully authenticated a username/password
with the network when WPA is enabled.
Joined Ad Hoc Network: successfully connected to and joined an ad-hoc network.
Started Ad Hoc Network: successfully created, started, and joined an ad-hoc
network.
Network Name
The name of the wireless network to which the Digi device is connected.
Network ID
The ID of the wireless network to which the Digi device is connected and communicating.
Channel
The frequency channel used by the wireless LAN radio for the Digi device.
Transmit Rate
The current transmission rate for the wireless LAN radio.
Signal Strength
The current receive signal strength as reported by the wireless LAN radio. Ranges are from
0 to 100.
M o n i t o r a n d m a n a g e D i g i d e v i c e s
1 6 0