Digi WAN 3G User Manual page 138

Change the password for administrative user
To increase security, change the password for the administrative user from its default. By default,
the administrative username is root.
Record the new password. If the changed password is lost, the Digi device must be
Note
reset to the default firmware settings.
In Digi devices with a single-user model, changing the root password also changes the password
for Advanced Digi Discovery Protocol (ADDP). In Digi devices with the multi-user model,
changing the root password has no effect on ADDP. To change the ADDP password, enter
newpass name=addp from the command line.
In the web interface:
On the Main menu, click Security.
1
On the Security Configuration page, enter the new password in the New Password and
2
Confirm Password edit boxes. The password can be from 4 through 16 characters long and
is case-sensitive. Click Apply.
3 A logoff is forced immediately. Log in to the web interface using the new values.
From the command line:
Issue the newpass command.
C o n f i g u r e D i g i d e v i c e s
1 3 8