Digi WAN 3G User Manual page 129

Number
Digi Login Traps Indicates when users attempt to log into the device, and whether the
MIB attempt was successful.
Digi Structures of Data structures for managing hosts and gateways on a network.
Management (SMI)
MIB
Digi Connect A Digi enterprise MIB for sending alarms as SNMP traps.for mobile
Mobile Traps MIB devices.
Digi Connectware This MIB may be required by some SNMP import facilities, as other
Notifications MIB MIBs may refer to it.
Supported SNMP traps
SNMP traps can be enabled or disabled. Supported traps include:
Authentication failure
Login
Cold start
Link up
Alarms can be issued in the form of SNMP traps.
A large set of MIBs define these various trap types (unsolicited status
message from the device).
All products support MIBs for serial alarms / login traps/RFC 1215.
Products with the geofencing/GPS feature support MIBs for
geofencing.
Products with mobile/cellular capability support MIBs for mobile
alarms.
Description
C o n f i g u r e D i g i d e v i c e s
Location
http://ftp1.digi.com/support/utilities/
Digi Part number 40002339_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002195_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002594_x.mib
http://ftp1.digi.com/support/utilities/
Digi Part number 40002514_x.mib
In the web interface, traps are enabled/
disabled at Configuration > System >
SNMP >
Enable Simple Network
Management Protocol (SNMP) traps
Alarms are configured at
Configuration > Alarms >
Alarm Conditions > Alarm n >
Alarm Destinations > Send SNMP
trap to following destination when
alarm occurs
1 2 9