Digi WAN 3G User Manual page 137

Password authentication
By default, there is no password authentication for Digi Cellular Family devices. When accessing
the Digi device by opening the web interface or issuing a telnet command, no login prompt is
displayed.
Enable password authentication
If desired, enable password authentication for the Digi device.
In the web interface:
1 On the Main menu, click Security.
2 On the Security Configuration page, check the Enable password authentication check
box.
Enter the new password in the New Password and Confirm Password edit boxes.
3
Click Apply.
4
A prompt is displayed to immediately log back in to the web interface using the new values.
5
From the command line:
To enable the login prompt for a device that uses the one-user model, issue a newpass command
with a password length of one or more characters.
Disable password authentication
Password authentication can be disabled as needed.
In the web interface:
On the Main menu, click Security.
1
On the Security Configuration page, check the Enable password authentication check
2
box.
Click Apply.
3
From the command line:
Issue a newpass command with a zero-length password.
C o n f i g u r e D i g i d e v i c e s
1 3 7