Digi WAN 3G User Manual page 17

Feature/task
Simple Network Management Protocol (SNMP):
  Configure SNMP through the
web interface
  Enable/disable SNMP service
 
Enable/disable SNMP alarm
traps
  Use SNMP as primary
configuration interface
System information: assign system-
identifying information to a device
Socket Tunnel Settings
Statistics for Digi devices
Status of Digi devices
VPN (Virtual Private Network)
Wi-Fi (wireless LAN) devices:
Wireless LAN Settings
Wireless Security Settings
Wireless 802.1x Authentication
Settings
Path to feature in the web interface
Configuration > System > Simple Network Management Protocol
(SNMP) Settings
Configuration > Network > Network Services
Configuration > Alarms > alarm > Send SNMP trap to following
destination when alarm occurs
Basic network and serial settings configurable through standard and Digi-
specific Management Information Blocks (MIBs).
More advanced settings must be set through the web or command-line user
interfaces, and sending alarms as SNMP traps must be configured through
the web interface, on the pages listed above.
Configuration > System > Device Identity Settings
Configuration > Network > Socket Tunnel Settings
Administration > System Information
Management > Serial Ports, Connections, Network Services
To configure VPN:
Configuration > Network > Virtual Private Network (VPN) Settings
To manage VPN:
Management > Connections > Virtual Private Network (VPN)
Connections
Configuration > Network > WiFi LAN Settings
Configuration > Network > WiFi Security Settings
Configuration > Network > WiFi 802.1x Settings
I n t r o d u c t i o n
See page
128
64
123, 124
35, 150
125
78
153
168
79
56
57
59
1 7