Digi WAN 3G User Manual page 14

Feature/task
 
Manage Virtual Private Network
(VPN) connections
  Manage active system
connections
  Manage network services
Domain Name System (DNS):
  DNS Client
  Dynamic DNS (DDNS) update
Dynamic Host Configuration Protocol
(DHCP) server
Ethernet settings
Event logging for the Digi device
Help on configuring features
Host name for a device
Industrial Automation (IA)
IP address settings
IP filtering / access control
IP forwarding: Network Address
Translation (NAT) and port
forwarding configuration/static routes
IP pass-through
Path to feature in the web interface
Management > Connections > Virtual Private Network (VPN) Settings
Management > Connections > Active System Connections
Management > Network Services
(Currently only DHCP server settings managed from here)
Configuration > Network > Advanced Network Settings
Configuration > Network > Dynamic DNS Update Settings
To configure a DHCP server:
Configuration > Network > DHCP Server Settings
To start and stop and show status of a DHCP server:
Management > Network Services > DHCP Server Management
Configuration > Network > Advanced Network Settings
Management > Event Logging
Help button on each page.
Configuration > Network > Advanced Network Settings > Host Name
Configuration > Serial Ports > Select Port Profile > Industrial
Automation
The Industrial Automation port profile should address most configuration
scenarios. To fine-tune your IA settings, use the "set ia" command from the
command line. See the set ia command description in the Digi Connect
Family Command Reference.
For additional information on configuring Industrial Automation, see this
web site:
http://www.digi.com/support/ia
Configuration > Network > IP Settings
Configuration > Network > Advanced Settings
Configuration > Network > IP Filtering Settings
Configuration > Network > IP Forwarding Settings
Configuration > Network > IP Pass-through
I n t r o d u c t i o n
See page
168
168
169
92
67
60
92
168
92
146
39, 55, 60, 92
70
71
79
1 4