Monitoring Capabilities From The Command Line; Commands For Displaying Device Information And Statistics - Digi LTS 32 User Manual

Monitoring capabilities from the command line

There are several commands for monitoring ConnectPort LTS products and managing their
connections. For complete descriptions of these commands, see the ConnectPort LTS Command
Reference.

Commands for displaying device information and statistics

display
The display command displays real-time information about a device, such as:
 General product information, including the product name, MAC address, boot, post, and
firmware versions, memory usage, utilization, and uptime, or the amount of time since the
device was booted (display device).
 Active interfaces on the system, for example, the web interface, command line interface, Point
to Point Protocol (PPP), and Ethernet interface, and their status, such as Closed or Connected.
(display netdevice)
 The event log (display buffers)
 Memory usage information (display memory)
 Serial modem signals (display serial)
 General status of the sockets resource (display sockets)
 Active TCP sessions and active TCP listeners (display tcp)
 Current UDP listeners (display udp)
 Point-to-Point Protocol (PPP) information (display pppstats)
 Uptime information (display uptime).
117