Peripheral - Digi LTS 32 User Manual

Peripheral

SD Memory
The ConnectPort LTS supports standard SD and SDHC (high-capacity) memory cards. To use an
SD memory device, insert the card to the SD slot and then select Start service on SD Memory
configuration page. Once the SD memory card service is started, you can see the card information
such as Card Type, File system, used size and available size. And you can also format the card
using the Format button on the SD Memory configuration page.
The physical mounting point of SD memory device on the ConnectPort LTS is /mnt/sd.
USB
To use USB device, insert the device to the USB port and then select Start service of the USB
device to be started on USB configuration page. ConnectPort LTS W version has two USB ports.
For the storage type USB device, you can see the device information such as Card Type, File
system, used size and available size after starting the USB service. And you can also format the
USB storage device using the Format button on the USB configuration page.
The physical mounting point of USB device on the ConnectPort LTS is /mnt/usb1 or /mnt/usb2.
86