User Settings - Digi LTS 32 User Manual

User settings

User settings involve several areas:
 User authentication: whether authentication is required for users accessing the ConnectPort
LTS product, and the information required to access it. Depending on the Digi product, multiple
users and their authentication information can be defined. User authentication settings are on
the Users settings page.
 User access settings: the device interfaces that a user can access, such as the command line or
web interface.
 User permissions settings: the permissions a user has to access and configure the Digi Connect
device.
 Several settings on the Network Configuration pages are available to further secure the
ConnectPort LTS product. For example, unused network services can be disabled on the
Network Services page.
Multi-user model implemented in ConnectPort LTS
The user model in ConnectPort LTS product influences the commands that users can issue.
ConnectPort LTS supports multiple users. ConnectPort LTS products use a more-than-two-user
model. Up to 32 users can be defined. Characteristics of this model include:
 User 1 has a default name of root. This user is also known as the administrative user.
 A user named ruser is used to set permissions for users authenticating remotely via RADIUS
and/or LDAP.
 Users are defined by the User settings in the web interface or the set user command in the
command-line interface.
 User 1 has default permissions that enable it to issue all commands.
 Permissions for User 1 can be changed to be less than the default root permissions.
 Additional users may be defined as needed.

set user, set group and other commands are described in detail in the ConnectPort LTS
Command Reference. Currently, there is no web interface page for defining user groups.
81