Configuration Using The Lcd Interface; Change Ip Settings - Digi LTS 32 User Manual

Configuration using the LCD interface

You can set the following configurations using the LCD interface:
 IP settings #1: Sets IP mode, IP address, Subnet mask, and the default gateway of network
interface #1. (You can only set IPv4 mode. LCD interface does not support the configuration of
IPv6 mode.)
 IP settings #2: Sets IP mode, IP address, Subnet mask, the default Gateway of network
interface #2.
 Host name: Host name of the device.
 DNS: Primary DNS of the device.

Change IP settings

Set IP Mode
Enter the IP settings menu by selecting CONFIGURATION and then IP SETTINGS #1 or
IP SETTINGS #2. The following menu is displayed:
By selecting the IP MODE menu item, you can choose one of following IP mode options,
 DISABLE: Disable this Ethernet interface.
 STATIC IP: Set the mode of IP address to STATIC.
 DHCP: Set the mode of IP address to DHCP.
133