Monitoring Using The Lcd Interface; Diagnostics Using The Lcd Interface - Digi LTS 32 User Manual

Monitoring using the LCD interface

The following information can be monitored through the LCD interface.
 Serial port
- Configuration: Profile, Baudrate, Data Bit, Parity Bit, Stop Bit, Flow control, Port Type
- Signal status: RTS, CTS, DTR, DSR, DCD
- Statistics: Data In, Data out, Parity Error, Framing Error, Overrun error
 Ethernet
- Speed, Duplex, Bytes Received, Bytes Sent, Packets Received, Packet Sent
 System
- Product Model, F/W version, Bios version, IP Address, MAC address, CPU Utilization, UP
Time, Memory(Total, Used, Free)

Diagnostics using the LCD interface

The following diagnostics can be run through the LCD interface:
 Auto Test: Run all possible hardware tests and show the results.
 Individual Test: Run the following tests by selection or manually: EEPROM, UART (Internal
& External), Ethernet, USB, SD Memory, Modem, XBee.
139