Configuration Through The Web Interface; Open The Web Interface - Digi LTS 32 User Manual

Configuration through the web interface

Configuring ConnectPort LTS products through the web interface involves these tasks:

Change the IP address, as needed


Open the web interface


Configure network communications

Configure the serial ports

Configure alarms.

Configure system-identifying information and the settings for Simple Network Management
Protocol (SNMP)

Configure security/user features such as user names and password authentication

Configure and run applications available for use.

Manage programs authored in the Python
Open the web interface
To open the web interface, either enter the URL of the ConnectPort LTS product in a web browser
and log on to the device, if required, or use the Digi Device Discovery utility to locate it and open
its web interface.
By entering the ConnectPort LTS product IP address in a web browser
1. In the URL address bar of a web browser, enter the IP address of the device.
2. If security has not been enabled for the ConnectPort LTS product, the Home page of the web
interface is displayed. If security has been enabled for the ConnectPort LTS product, a login
dialog will be displayed. Enter the user name and password for the device. The default
username is root and the default password is dbps. If these defaults do not work, contact the
system administrator who set up the device. Then the Home page of the web interface is
displayed. See "Organization of the web interface" for an overview of using the Home page and
other linked pages.
Note The idle timeout automatically logs users out of the web interface after 60 minutes of
inactivity. This can be changed Web settings on Configuration > Network -> Network Services
Settings -> Advanced Network Services Settings.
®
programming language
41