Removal Procedures; Covers Removals; Left Door Removal - Lexmark T632 Service Manual

Removal procedures

CAUTION:Remove the power cord from the printer or wall outlet before you connect or
disconnect any cable or electronic board or assembly for personal safety and to prevent
damage to the printer. Use the handholds on the side of the printer. Make sure your
fingers are not under the printer when you lift or set the printer down.
Note: Some removal procedures require removing cable ties. You must replace cable ties during
reassembly to avoid pinching wires, obstructing the paper path, or restricting mechanical movement.

Covers removals

Left door removal

1.
Open the upper and bottom front covers.
2.
Press the two left door latch buttons (A) and open the left door.
3.
Release the left door from the rear hinges and remove the door.
A
4060-xxx
4-9
Repair information