Staplesmart Finisher - Lexmark T632 Service Manual

StapleSmart finisher

Symptom
Finisher does not staple.
Printer does not recognize StapleSmart
Finisher Option as being installed.
Close Top Cover displayed. Unable to clear
or reset message (POST incomplete).
Close Finisher Side Cover displayed.
Unable to clear or reset message (POST
incomplete).
Paper feeds into finisher option output tray.
Paper is not stapled and paper does not
align with the right side.
Paper feeds into finisher option. Paper
aligns with the right side. The stapler does
not staple.
Paper is transported into the output tray but
is not stapled.
Stapled sheets are not transported to the
output tray.
Action
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
Go to "StapleSmart finisher service check" on page
4060-xxx
2-86.
2-86.
2-86.
2-86.
2-86.
2-86.
2-86.
2-86.
Diagnostic information
2-37