Fuser Assembly Removal - Lexmark T632 Service Manual

Fuser assembly removal

CAUTION: Unplug the printer before you begin.
1.
Remove the redrive assembly. See
2.
Remove the fuser mounting screws (A).
3.
Disconnect the AC fuser lamp cable (C) from the fuser lamp connector (D).
4.
Pull the fuser assembly out far enough to remove the fuser lamp cable.
5.
Disconnect the DC fuser cable (E) from the fuser board.
6.
Pull the cables free and remove the fuser.
"Redrive assembly removal" on page
A
D
A
C E
Repair information
4060-xxx
4-57.
4-23