Optional 250 Or 500-Sheet Paper Tray Assembly Removal; Paper Tray Autocompensator Assembly Removal; Paper Tray Frame Assembly Removal; Paper Tray Board Removal - Lexmark T632 Service Manual

Optional 250 or 500-sheet paper tray assembly removal

Note: Remove the printer and other paper feed options to access the failing optional paper tray
assembly.

Paper tray autocompensator assembly removal

1.
Remove the printer and other paper feed options.
2.
Disconnect the autocompensator assembly bias spring from the tray frame.
3.
Disconnect the autocompensator assembly motor cable.
4.
Remove the three autocompensator assembly mounting screws and remove the compensator
assembly.

Paper tray frame assembly removal

1.
Remove the autocompensator assembly.
2.
Release the paper pass thru sensor from its retaining tabs.
3.
Release the frame assembly from the front and rear retaining tabs and remove the paper tray
frame assembly.

Paper tray board removal

1.
Remove the paper tray frame assembly.
2.
Disconnect all cables from the paper tray board.
3.
Remove the three paper tray board mounting screws and remove the board.
Note: Reinstall with the paper out sensor flag positioned in the sensor slot on the paper tray board.

Paper tray paper out sensor flag removal

1.
Remove the paper tray frame assembly.
2.
Remove the paper tray board.
3.
Remove the paper out sensor flag.

Paper size spring comb removal

1.
Remove the paper tray board.
2.
Remove the paper size spring comb mounting screw and remove the spring comb.
4060-xxx
4-51
Repair information