Time To First Print; Memory Configuration - Lexmark T632 Service Manual

4060-xxx

Time to first print

Time from standby mode
Time from Power Saver mode
All first copy times are measured for 600 dpi simplex printing on letter size paper. The test job consists of the
character "A" followed by a form-feed (single page job). The first copy time is defined as the elapsed time
from pressing Enter on the PC keyboard to the page exiting to the output bin. All tests pick paper from the
indicated tray and the page exits into the primary output bin.

Memory configuration

Memory
Standard DRAM
Maximum
Depending upon the options and features used, additional memory may be required to optimize
performance.
Available memory options
Optional 8MB, 16MB, 32MB, 64MB, and 128MB SDRAM DIMMs are available from Lexmark. The
memory options are 168-pin synchronous DRAM DIMMs.
Flash memory options include 16MB and 32MB.
1-4
Service Manual
Lexmark T630, Lexmark T632,
Lexmark T630n Lexmark T632n
<8.5 sec.
42 sec.
Lexmark T630, Lexmark T632,
Lexmark T630n Lexmark T632n
32/64MB 64/64MB
288/320MB 320/320MB
Lexmark T634,
Lexmark T634n
<10 sec.
42 sec.
Lexmark T634,
Lexmark T634n
64/80MB
320/336MB