5060-00x
Cartridge drive assembly removal
See
"Cartridge drive assembly, cyan/magenta/black"
1.
Remove the RIP board shield assembly. See
2.
Remove the engine board. See
3.
Remove the three cartridge drive assembly mounting screws (A) for the cartridge drive assembly you want
to remove.
4.
Disconnect the cable (B) from the cartridge drive assembly.
5.
Remove the cartridge drive assembly.
4-26
Service Manual
for the part number.
"RIP board shield assembly removal" on page
"Engine board removal" on page
4-29.
4-71.