Duplex Option Deflector Button Replacement - Lexmark C750 Service Manual

Service manual
Hide thumbs Also See for C750:
Table of Contents

Advertisement

Duplex option deflector button replacement

During a duplex job, the duplex option fails to actuate the deflector in the fuser and the paper is diverted away
from the duplex. The duplex option does not receive the sheet and prompts a 230 Paper Jam message. Replace
the rubber deflector button with the compression spring deflector button.
1.
The FRU kit contains a spring and button that should be assembled as shown.
2.
Remove the deflector button by pulling up.
3.
Place the new button into the cam.
4.
Verify the new button moves freely by pressing the button firmly down and watching for it to snap back.
Note: Leave the button in the up position.
5060-00x
Appendix A—Service tips
A-29

Advertisement

Table of Contents
loading

This manual is also suitable for:

5060-00x

Table of Contents