5060-00x
Printhead alignment
Identifying the printheads
Warnings:
•
Do not loosen or replace more than one printhead at a time to retain factory settings.
•
Whenever a printhead is replaced, you must to perform the
appendix page A-5
•
The front cover must be installed and closed before any printhead alignment can be performed. It is not
necessary to remove the front cover to access the printheads.
•
If there is a protective lens cover on the new printhead, it must be removed before installing the
replacement printhead.
A-4
Service Manual
and
"Electronic color alignment" on appendix page
"Printhead mechanical alignment" on
A-12.