Second Transfer Roll Removal - Lexmark C750 Service Manual

12.
Install a new cable tie in the same location as the one that was previously removed (B), if necessary.
13.
Install the MPF tray assembly and replace the screw to reconnect the MPF assembly door hinge restraint.
14.
Install the ITU and print cartridges.
15.
Reconnect power to the printer.
16.
Run the print test to check for correct operation before replacing the right rear cover.
17.
Replace the right rear cover.

Second transfer roll removal

See "Second transfer roll" on page 7-14
1.
Remove the ITU assembly. See
2.
Lift the transfer roll from the front bearing and remove the transfer roll.
A
for the part number.
"ITU assembly removal" on page 4-37.
Repair information
5060-00x
4-79