Lexmark C750 Service Manual page 262

5060-00x
Installation notes:
1.
Rotate the new nip relief handle into place to connect it to the nip relief link (A).
2.
Using a screwdriver, gently pry the nip relief lever (B) towards the rear of the machine and insert lower
portion of handle so that it is trapped between the lever and the reference edge plate (C).
3.
Holding the nip relief handle in place, use a flathead screwdriver to gently pry up on the top portion of the
lever allowing the handle to press into place onto the post using moderate force.
4-44
Service Manual