Field Replaceable Units
FRU Removal and Replacement
Main Tray Assembly
Perform the following steps to remove the main tray
assembly from the system unit:
1 Completely loosen the four captive screws on the rear of
Captive Screws
Figure 32
Removing the Main Tray Assembly
2 Place one hand on the top of the system unit and push,
3 Slide the main tray assembly out of the chassis.
102
the system unit, as shown in Figure 32.
while using your other hand to pull on the handle on the
rear panel. See Figure 32.
Captive
Screws