HP Visualize c100 Service Handbook page 176

Boot Console Interface
Updating System Firmware with ODE
To run the update utility, type run at the
prompt. After update loads the new images into mem-
ory, it asks if you want to continue the update process,
and displays the PDC version of the currently running
PDC as well as that of the images that were loaded. If
you wish to continue, type y.
When the update process has completed, the machine
reboots automatically.
If you are using a graphics monitor for the updating pro-
cedure, characters may not be printed to the screen cor-
rectly because the character set for graphics printing is
stored in the machine ROM that is overwritten. We rec-
ommend that you use a terminal connected to the first
serial port, serial 1, for updating your workstation.
172
UPDATE>